Parts & Accessories

- Tool + 250 Studs

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

"Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it. Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn’t widen the size of the hole already there. Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn’t have any issues gripping the tool, even in the muddiest of conditions. Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. KEY FEATURES - Available in 12x Chris King colours - Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork - With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn’t widen the size of the - hole already there - Fork made from 316 stainless steel - Body made from anodised 6061 aluminium - Knurled body and ribbed lid / handle for extra grip - Weather sealing o-rings make the tool waterproof when assembled - Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs"

- Available in 1.5mm & 3mm plug sizes. - 6 plugs per pack, in 2 sheets of 3 plugs - Designed to fit perfectly into the body of Peaty’s Holeshot Tyre Puncture Plugger tool - Packaged using recycled cardboard header cards and biodegradable bags

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

High-performance tire sealant specifically designed for the tubeless systems of both mountain bikes and road bikes. The advanced formulation combines fast-acting polymers with suspended rubber particles to instantly seal punctures, providing a patch as durable as the tire itself. Developed with top professional teams, Tubeless Sealant is robust enough for the professional, immediately sealing punctures up to ¼” and long-lasting enough for the leisure rider, remaining functional for up to 6 months. For use on all mountain and road bike tubeless systems to prevent flats and seat beads. Can be used with aluminum or carbon wheels. Features: - Professional grade formulation. - Seals faster than the competition. - Forms durable seal that will not re-open. - Effective in all conditions and environments. - Safe on aluminum and carbon wheels. - Eco-friendly.

- Latex-based formula which can simultaneously inflate and seal most common punctures quickly - Works with tubes, tubeless, and tubular tires - Proven to seal up to a 6mm puncture on tubeless tires, getting you back in the saddle faster - Enough pressure to seat a tubeless tire onto a rim - Comes with an easy-to-use hose adapter and both Schrader and Presta valve compatible threaded nozzles - Fills a 29 x 2.4 MTB tire up to about 29psi

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving you Total Confidence to ride at your best.

Lightweight 6061 alloy. - Provides up to an additional 117mm of extension - 1 1/8" - 223g

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction